This product is upgraded in-house by a certified CeramicSpeed Technician and comes pre-installed with the below CeramicSpeed component:

1x SRAM Rival 1 Type 3.0 Rear Derailleur

1x CeramicSpeed SRAM 11 Speed Pulley Wheels

CeramicSpeed Pulley Wheels are designed to guide the chain in its ideal line, performing smooth and precise shifting. 

Delivering lower friction and a 3-5 longer lifetime, compared to other high-end stock pulley wheels, the Ceramicspeed Pulley Wheels benefit you with less drag on your energy.

SRAM Rival 1 Type 3.0 Rear Derailleur

Your needs aren’t less demanding, they’re different.

The SRAM Rival 1 rear derailleur is engineered for smooth, reliable shifting action, delivering 100% of what you demand. By eliminating unwanted chain movement, X-Horizon shifts faster, reducing shift effort and chain slap.


Technologies

Cage Lock - With Cage Lock technology in the rear derailleur, wheel removal and installation—as well as chain installation—becomes faster and simpler. Just pushing the cage forward to create slack and lock it into place.

Exact Actuation - When we launched our road technology from scratch we reapplied our MTB proven SRAM 1:1 actuation ratio (shifter cable travel : derailleur movement) for 10 speed rear shifting. EA helps to simplify/stabilize the uneasy act of balancing rear derailleur hanger design, tight cog spacing and exact cable tension. The result: the easiest index shifting system to set up and it stays that way.

Roller Bearing Clutch - rear derailleurs deliver maximum drivetrain stability—even through the most punishing terrain. With Roller Bearing Clutch technology, derailleur bounce and chain slap are eliminated without sacrificing precision.

X-Horizon - The X-Horizon rear derailleur’s ‘straight parallelogram’ design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force. For quicker, more exact shifting, the large upper pulley offset design maintains a constant chain gap across all gears.

X-Sync1x chain rings provide the highest level of performance and durability. The SRAM X-Sync tall square teeth edges engage the chain earlier than traditional triangle shaped teeth. The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain. To provide the best possible performance in muddy conditions, the X-Sync chain rings have been designed with mud-clearing recesses for the inner chain links and rollers. Engineered in Germany, X-Sync rings are an integral part of the SRAM 1x drivetrain.

Features

X-Horizon design reduces shift force while eliminating ghost shifting and chain slap

Large upper pulley offset automatically adjusts chain gap

Sealed cartridge bearings and aluminum cage

Technologies: X-Horizon, Exact Actuation, X-Sync, Roller Bearing Clutch, Cage Lock

Medium cage: 11-26 through 11-36 cassettes (269g)

Long cage: 10-42 cassette

Specifications

Speeds: 11-speed

Weight: 269g – Medium Cage

Colors: Black

Outer Cage: Aluminum

Compatibility: 10 Or 11-speed 1x Road Systems

Inner Cage: Aluminum

Bearings: Sealed Cartridge

Cage Sizes: Medium 11-26 Through 11-36, And Long 10-42

Pulleys: 12-tooth X-sync

Pull: Exact Actuation

Technology Highlight(s): X-Horizon, Cage Lock

 

CeramicSpeed SRAM 11 Speed Pulley Wheels

Ceramicspeed Pulley Wheels that accommodate all SRAM 11s mechanical and electrical groupsets.

The pulley wheels are available in anodised aluminium or titanium and the latter can be fitted with either standard or coated CeramicSpeed Bearings.

Designed to fit all SRAM 11s mechanical and electrical derailleurs, these CeramicSpeed SRAM 11 Speed Pulley Wheels put less friction between the power transferred from your legs and the rear wheel.

Each pulley wheel is fitted with CeramicSpeed high quality bearings that offer for a more efficient drivetrain.

Features

Coated bearings - CeramicSpeed's coating has several performance enhancing properties that makes it unique. Thanks to their continuous R&D program, CeramicSpeed have developed a special coating in cooperation with a European coating specialist. Applied to the steel races of the bearing, through an advanced process that ensures an even, smooth and homogeneous surface, the coating formula improves even further the high quality of the CeramicSpeed bearings.

Low friction Once coated, the bearing races deliver a hardness level matched only by the CeramicSpeed balls, providing an extremely low friction coefficient between the two materials. The result is thus even less friction in our coated bearings than in their standard bearings.

Coating Graf Friction - The coating is a metallic layer, which is 75% harder than the hardened steel races. The coating is applied in a very thin and even layer of 3 microns (0,003 mm) on the entire surface of the bearing race. Both the inside and the outside are treated to achieve optimal results. As CeramicSpeed use a metallic coating on top of the hardened steel, it can be difficult to see that a bearing is actually coated. However, if you take a closer look at a coated bearing, you will notice that the surface has a different shine than a standard CeramicSpeed bearing.

Lifetime - The coating has several properties that improve the lifetime of CeramicSpeed's bearings. The increased hardness of the races combined with the super smooth and round CeramicSpeed balls, means virtually no wear on the bearing.

The coating layer is applied completely closed and homogenous. The formula used for the coating is extremely resistant to corrosion. This means that even if the bearing is contaminated with degreaser, water or mud, the risk of bearing failure due to corrosion is negligible.

How to achieve the optimal performance - The coated bearings are more resistant to lack of lubrication when it comes to wear and damage on the bearing nonetheless, this does not mean that the need for maintenance is completely eliminated. Just as CeramicSpeed do with their standard bearings, they recommend to always lubricate them with our special grease to achieve optimal performance in terms of low friction and long lifetime. For all training and racing applications they recommend the use of CeramicSpeed Blue all-round grease. If you want to achieve the lowest possible friction, CeramicSpeed recommend you to use their TT grease. Please be aware that compared to the standard Blue all-round grease, the TT grease has a shortened lifetime and therefore, it requires more frequent application.

Handmade in Denmark Like all other CeramicSpeed bearings, their coated products are handmade in Denmark. This means all bearings are built by hand and inspected manually at each step in the production process. Building a coated bearing adds a number of extra steps to the process. The CeramicSpeed balls and steel races are matched within microns after which, each set of races is coated. The races are kept together in pairs through the entire process and after coating, each set needs to pass the quality control before they go into production.

CeramicSpeed coated bearings are available for pulley wheels, bottom brackets, wheel bearings and the Oversized Pulley Wheel System.

Specifications

Rear Derailleur: Sram

Speed: 11

Material: Aluminium

Coated: No

Weight: 24g

Be The First To Review This Product!

Help other Bikebug Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review