Race Winning Components

The Renthal Apex 35 combines All Mountain strength, Enduro stiffness and XC lightweight. Unique 240deg handlebar clamps allow much of the stem body material to be removed, whilst retaining the strength and stiffness demanded by modern, wide handlebars.

The Apex 35 is fully CNC machined, featuring an oversize centre bore, extensive machining and external webbing to maximise structural strength and stiffness and minimise weight.

Features

CNC Machined - The Renthal Apex 35 is CNC machined from a solid billet of 2014 aluminium with 7075 aluminium clamps. These materials were specifically chosen for this application, to give the highest strength to weight ratio.

240 degree clamps - The clamps are inserted over the small diameter section of the handlebar and slid into the centre, giving a 240 degree wrap of the handlebar.

Zero Gap The Apex 35 handlebar clamping system features a zero-gap at the underside of the handlebar. This gives superior support for the handlebar and ensures accurate bolt torque

+/- 6 Degree Angle The stem body can be flipped to give either a plus 6 degree or minus 6 degree rise. This allows the correct bar height to be achieved with any wheel size or head tube length.

Oversize Centre Bore - The unique handlebar clamping system opens up the front of the stem, allowing an oversize centre bore, to increase stiffness and strength.

High Quality Finish - After CNC machining, the stem components are anodised and laser marked to give a very high quality and durable finish.

Specifications

Apex 35 33mm

Weight: 112g

Rise: +/- 6°

Clamp width: 46mm

Stack Height: 40mm

Clamp diameter: 35mm

Steerer Clamp Diameter: 28.6mm

Apex 35 40mm

Weight: 122g
Rise: +/- 6°

Clamp width: 46mm

Stack Height: 40mm

Clamp diameter: 35mm

Steerer Clamp Diameter: 28.6mm

Apex 35 50mm

Weight: 136g

Rise: +/- 6°

Clamp width: 46mm

Stack Height: 40mm

Clamp diameter: 35mm

Steerer Clamp Diameter: 28.6mm

Apex 35 60mm

Weight: 147g

Rise: +/- 6°

Clamp width: 46mm

Stack Height: 40mm

Clamp diameter: 35mm

Steerer Clamp Diameter: 28.6mm

Be The First To Review This Product!

Help other Bikebug Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review