Please note that Stan's Yellow Rim Tape by itself is not a tubeless conversion. Traditional (Non-BST) rims require the use of a Stan's NoTubes rim strip to achieve a secure tubeless setup. Using only Yellow Rim Tape and Stan's NoTubes sealant on a convent

Stans NoTubes Rim Tape 10yd can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim.

Specifications

10yd x 21mm

A single 10 yard roll will tape 5 x 26" rims, 4 x 29" rims or 2 x road clincher rims.

21mm width fits: ZTR Olympic, ZTR 355, ZTR Alpine, ZTR Crest, ZTR Iron Cross, ZTR Alpha 340 (2 layers), ZTR Alpha 400 (2 layers), Most road clincher rims

A single 10 yard roll will tape 5 x 26" rims, 4 x 29" rims or 2 x road clincher rims.

10yd x 25mm

A single 10 yard roll will tape 5 x 26" rims, 4 x 29" rims or 2 x road clincher rims.

27mm width fits: ZTR 355 (26", 650b, 29"), ZTR Crest, ZTR Arch EX and ZTR Flow EX rims.

10yd x 27mm

A single 10 yard roll will tape 5 x 26" rims, 4 x 29" rims or 2 x road clincher rims.

27mm width fits: ZTR Flow EX, ZTR Bravo, ZTR Hugo 52mm, ZTR Rapid 28, ZTR Rapid 30

10yd x 30mm

A single 10 yard roll will tape 5) x 26" rims or 4 x 29" rims or 2 x wide road clincher rims.

30mm width fits:ZTR Flow MK3

10yd x 33mm

Stan's 33mm Rim Tape is recommended for rims with an internal width of 31-33mm.

Our tape is air tight and non-pourous, super thin and will not affect tire fit, and does not leave a messy residue when it needs to be replaced.

When running less than 45psi a single wrap of tape is neccasary, when running greater than 45psi a double wrap of tap is required. 

10yd x 36mm

Stan's 36mm Rim Tape is recommended for rims with an internal width of 34-36mm.

Our tape is air tight and non-pourous, super thin and will not affect tire fit, and does not leave a messy residue when it needs to be replaced.

When running less than 45psi a single wrap of tape is neccasary, when running greater than 45psi a double wrap of tap is required. 

10yd x 39mm

Stan's 39mm Rim Tape is recommended for rims with an internal width of 37-39mm.

Our tape is air tight and non-pourous, super thin and will not affect tire fit, and does not leave a messy residue when it needs to be replaced.

When running less than 45psi a single wrap of tape is neccasary, when running greater than 45psi a double wrap of tap is required. 

Please note: 10yd x 21mm ,10yd x 25mm  ,10yd x 27mm & 10yd x 30mm

  That Stan's Yellow Rim Tape by itself is not a tubeless conversion. Traditional (Non Stan's NoTubes ZTR) rims including those labeled "tubeless ready" still require a black rubber NoTubes Rim Strip to achieve a secure tubeless setup. Using only Yellow Rim Tape and NoTubes Tire Sealant on a conventional rim can result in catastrophic "burping" issues.  The rapid loss of air while riding can have disastrous consequences.  Please see our Rim Strip Selector tool for help in determining the appropriate setup for your rims.

Please note: 10yd x 33mm , 10yd x 36mm & 10yd x 39mm

That Stan's Yellow Rim Tape by itself is not a tubeless conversion. Traditional (Non-BST) rims require the use of a Stan’s NoTubes rim strip to achieve a secure tubeless setup. Using only Yellow Rim Tape and Stan’s NoTubes sealant on a conventional rim can result in difficult inflation, and catastrophic "burping" issues. Please see our Rim Strips for converting traditional non-tubeless rims. Visit our support section for a video on how to convert your rims.

 

 

 

 

Be The First To Review This Product!

Help other Bikebug Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review